pressure transmitter shop
Instrument Sunshade
shop
pressure transmitter shop
Instrument Sunshade
shop
Instrument sunshade is a stainless steel protective cover used for outdoor field instruments. It helps reduce direct sunlight exposure, rainwater impact, dust accumulation and harsh weather influence on transmitters, meters and detectors. SIY Electric can customize sunshade covers for pressure transmitters, radar level meters, flow meters, temperature Instruments, even gas detectors and other industrial instruments according to the instrument size, mounting method and site conditions.
A stainless steel instrument sunshade is a practical protective accessory for outdoor field instruments. It is usually made from 304 or 316 stainless steel sheet and installed above or around the instrument to reduce direct sunlight, block rainwater impact and provide basic external protection.
In many industrial sites, instruments are installed in tank farms, outdoor pipelines, platforms, open-air equipment areas or field monitoring points. Even when the instrument itself has an IP65, IP66 or IP67 enclosure rating, long-term exposure to sunlight, rain, dust and temperature changes may still cause display reflection, housing temperature rise, nameplate aging, cable entry risks and additional maintenance problems.
Unlike a fully enclosed instrument protection box, an instrument sunshade does not completely cover the instrument. Its purpose is to provide useful sun and rain protection while keeping the instrument readable, accessible, ventilated and easy to maintain.
SIY Electric can customize stainless steel sunshades for different field instruments, including pressure transmitters, differential pressure transmitters, radar level meters, temperature transmitters, flow instruments, gas detectors and other outdoor industrial instruments.
The sunshade helps reduce direct sunlight on the instrument housing and display area. It can lower surface temperature, reduce display reflection and help slow down the aging of plastic parts, sealing rings, nameplates and housing coatings.
For outdoor instruments, rainwater may continuously wash the housing, display window, cable entry and terminal area. A sunshade can block part of the rainwater from falling directly onto the instrument body and provide basic rain protection.
In sites with dust, leaves, splashing liquid or airborne debris, the sunshade can reduce direct accumulation on the instrument housing, display screen or wiring area. This makes routine inspection and cleaning easier.
The sunshade can provide a certain level of external protection for the instrument, reducing the direct impact of minor collisions, falling debris or field operation on the instrument housing.
For complete projects, pipe racks, tank farms and outdoor platforms, using stainless steel instrument sunshades can make field instrument installation more consistent, neat and easier to manage during maintenance.
| Top Sunshade | Suitable for instruments that only require top sun and rain protection |
| Three-Side Protective Cover | Suitable for instruments requiring both top and side protection |
| U-Shaped Sunshade | Suitable for transmitters, gas detectors and small field instruments |
| Angled Sunshade | Suitable for installations where rainwater needs to flow away naturally |
| Pipe-Mounted Sunshade | Suitable for instruments installed on 2-inch pipes, posts or brackets |
| Customized Bracket Type | Suitable for special sizes, special mounting directions or project requirements |
The sunshade is commonly made from 304 stainless steel or 316 stainless steel. For general outdoor applications, 304 stainless steel is usually suitable. For coastal areas, chemical plants or more corrosive environments, 316 stainless steel can be selected.
Different instruments and brands may have different shapes, sizes, display directions, cable entry positions and installation methods. Therefore, a completely standard size is not always suitable. SIY Electric can customize the sunshade according to instrument photos, model numbers, dimensional drawings or site installation pictures.
The sunshade can be fixed by screws, bolts, pipe clamps, mounting brackets or existing instrument supports. Its simple structure makes field installation and replacement convenient.
A properly designed sunshade will not block the display, cable entry, adjustment buttons, nameplate or maintenance space. For special instruments such as gas detectors and radar level meters, sensor openings, antenna areas or gas diffusion space can also be reserved.
For outdoor projects, the sunshade can be customized in batches with a unified structure or designed separately according to different instrument categories. This helps make field installation more standardized and future spare parts management easier.
| Material | 304 stainless steel, 316 stainless steel or customized material |
| Surface Finish | Brushed, polished or standard stainless steel surface |
| Sheet Thickness | Customized according to size and strength requirements |
| Structure Type | Top-cover type, three-side protection type, U-shaped type, angled type, pipe-mounted type, customized structure |
| Mounting Method | Screw fixing, bolt fixing, pipe clamp fixing, bracket fixing or customized mounting |
| Applicable Instruments | Pressure transmitters, radar level meters, gas detectors, temperature transmitters, flow instruments, local display instruments and other field instruments |
| Main Function | Sun protection, rain protection, dust shielding and basic field protection |
| Customization Options | Overall size, bending direction, hole position, bracket, mounting direction and sheet thickness |
| Application Environment | Outdoor pipelines, tank farms, water treatment, chemical plants, environmental monitoring and industrial automation sites |
To customize a suitable instrument sunshade, the following information is recommended before quotation:
Such as pressure transmitter, temperature instrument, radar level meter, vortex flow meter, gas detector or other field instrument.
Instrument dimensional drawings and site installation drawings are preferred. These help confirm the width, height, depth, display position, cable entry position and required maintenance space.
Please confirm whether the instrument is installed on a pipeline, bracket, wall, tank top, post or equipment body.
Some sites only require top protection, while others require both top and side protection against sunlight and rain.
The material is usually specified by the customer. For general outdoor environments, 304 stainless steel is commonly used. For corrosive environments, coastal areas or chemical plants, 316 stainless steel can be considered.
For project batch use, customers can provide an instrument list, installation drawings or site photos. We can design and manufacture the sunshades according to project requirements.
SIY Electric provides customized stainless steel sunshades for different industrial instruments. Whether the application is a pressure transmitter, level transmitter, differential pressure transmitter, temperature transmitter, flow instrument, gas detector or another outdoor field instrument, we can design a suitable sun and rain protection structure according to the instrument shape, mounting method and site environment.
Customers can provide instrument photos, dimensional drawings, model numbers, site installation pictures or physical samples. Based on the actual application, we can recommend a suitable sunshade structure, material and mounting method.
For projects with multiple types of outdoor instruments requiring outdoor protection, we can also design and produce different sunshades according to instrument categories, helping the site achieve a unified, neat and practical instrument protection solution.
Request Your Custom Solution & Factory Price
*We respect your privacy. Your information is used for technical quotation purposes only and will never be shared.
